![background image](http://html1.mh-extra.com/html/barco/barcoslm-r6/barcoslm-r6_owners-manual_473914101.webp)
9. Service Mode
All projectors must have a different projector address between 1 and 12.
All must have the same baud rate and RS mode.
The constant light output setting of one projector must be in the master position. All others must be in the slave position.
Image 9-4
Which information is available
serial number
unique serial number of the lamp
type
lamp type
run time
total time the lamp is used in this or other projectors.
remaining run time
time left before the lamp must be replaced Using the lamp longer than the maximum run time may
damage the projector.
number of strikes
Total times the lamp is started up.
Z-AXIS
indication to adjust the Z-AXIS of the lamp (see Re-adjustment of the lamp position in chapter
Installation Guidelines).
How to display the lamp menu
1. Push the cursor key
↑
or
↓
to highlight
Lamp
. (menu 9-24)
2. Press
ENTER
to select.
The lamp menu will be displayed. (menu 9-25)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-24
LAMP
Constant Light output [OFF]
Mode [NORMAL]
Serial number :
R101111
Article number :
R9840xxx
Run time :
10 hours
Remaining run time :
490
hours
Number of strikes :
10
Z_AXIS : 100
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-25
How to switch the constant light output?
1. Push the cursor key
↑
or
↓
to highlight
Constant Light Output
2. Press
ENTER
to toggle between [OFF], [SLAVE] and [MASTER].
[OFF]
fixed power, no power adaptation.
[SLAVE]
follows the master projector to adjust the CLO. When stand alone and the light output should be adjusted,
put on slave.
[MAS-
TER]
master projector to control the CLO in a chain of projectors.
R5976483 BARCOSLM R6 17092002
97
Summary of Contents for BARCOSLM R6
