background image

3. Replacing the Analyzers

3. REPLACING THE ANALYZERS

Overview

Removing the Analyzers

Mounting the Analyzers

3.1 Removing the Analyzers

Necessary tools

flat screwdriver

Philips screwdriver

How to remove the analyzers ?

1. Remove the power cable (1) (image 3-1)

2. Remove the flat cables (2), disconnect by simultaneously pulling out the 2 mini locks on both sides of the flat cable connector.

Caution:

Do not touch the contacts of the flat cable when removing the flat cable otherwise damage my occur by oxidation of
these contacts.

Do not use any tools when (dis)connecting a flat cable connector, otherwise damage may occur on the mini locks.

3. Loosen the 4 screws and remove the buffer module (image 3-2)

4. Loosen the 3 screws and remove the metallic plate (image 3-3)

5. Remove the analyzer by pulling it slightly laterally to free fixation holes and sliding it gently out of the assembly. One may use a

screwdriver to pull out the analyzer (by putting it in the screwdriver opening) (image 3-4)

Image 3-1

Image 3-2

Image 3-3

R5976046 ANALYSER KIT FOR R/G 6300/6400 AND SIM6 01122003

9

Summary of Contents for BarcoReality SIM 6
















Reviews: