Barco BARCOREALITY SIM 6 MK II + WARP 6, Owner'S Manual

Page: 47 / 157

5. Random Access
Source number The source number of a non-active source can be changed to any other source number. This makes
it possible to create a file for future source numbers.
Clamp delay The time between the leading edge of the clamp pulse and the locked edge of the sync pulse. Can be
any value between 0 and 255. Change the value by pushing the cursor key
↑ or ↓ .
Clamp width The width of the clamp pulse can be any value between 0 and 255. Change the value by pushing
the cursor key
↑ or ↓ .
Sync
pulse
Clamp
pulse
Clamp
delay Clamp
width
Le
a
d
ing e
dge
Tr
a
ilinging e
dge
Image 5-1
Example for
Clamp position
[trailing]
Field polarity The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a
wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to
[neg] or [pos]. Use the
ENTER
key to toggle between [pos] and [neg].
5.3.5.4 Rename
Start Up
To change the name of a selected file :
1. Push the cursor key
↑ or ↓ to highlight
Rename
. (menu 5-12)
2. Press
ENTER
.
The Rename selection menu will be displayed. (menu 5-13)
3. Push the cursor key ↑ or ↓ to select a file name.
4. Press
ENTER
to select.
The Rename file menu will be displayed with the selected file name already filled in, leave in the ’From file name :’ area and in
the ’To file name :’ area. The first character in the ’To file name :’ area is highlighted.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 5-12
RENAME FILE
Filename Scr resolution
xga_60.s01 1 1024x768
xga_60.c01 1 1024x760
xga_60.c02 1 1024x760
xga_60.c03 1 1024x760
----------------------------
Active file : xga_60.c04
Select with
↑
or
↓
,
→
<ENTER> to accept
<EXIT> to return
Menu 5-13
R5976496 BARCOREALITY SIM 6 MK II + WARP 6 TM 15052003 43