![background image](http://html1.mh-extra.com/html/barco/barcoiq-graphics-200l/barcoiq-graphics-200l_owners-manual_473899084.webp)
9. Signal Menu
How to select a switching mode ?
1. Press
MENU
to activate the Toolbar
2. Press
→
to select the
Signal
item
3. Press
↓
to Pull down the
Signal
menu
4. Use
↑
or
↓
to select
Switching mode
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select the desired switching mode (image 9-2)
7. Press
ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
Image 9-2
The Random mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
Note on Fade in/out
In some cases, depending on the sources to be switched, the fade in/out effect is impossible or may not occur.
78
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
Summary of Contents for BARCOIQ GRAPHICS 200L
