Barco BARCOIQ GRAPHICS 200L, Owner'S Manual, Page: 48 / 125

5. Source Selection
5.2 Source selection
Selecting a source
The Source selection menu allows to select one of the different sources. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
How to select a source ?
1. Press MENU to activate the Toolbar
2. Press
↓
to Pull down the Source Selection menu
3. Use
↑
or
↓
to select one of the different sources ( Press
→
to Pull down if the item has a submenu) (image 5-2)
4. Press ENTER to confirm your choice
On the screen appears now the selected source.
Image 5-2
The Barco logo on the menu indicates the presence of a signal, the digit indicates the shortcut key on the
RCU.
The 3 first sources (Data on BNC’s, Component Video & RG(s)B) refer to the 5-cable input, the position of the
indication “1” will always show which BNC configuration is selected.
When to select “Data on BNC’s”
Select Data on BNC’s when a data signal is connected to the BNC’s
When to select “Component video” ?
Select Component video when a signal of the type (PR/Y/PB) is connected on the BNC’s.
When to select RG
s
B Video ?
Select RG
s
B Video when an RGB video signal with Sync on green or sync on H is presented on the BNC’s
This signal is routed to the video circuit and is projected in a Video Window.
42 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002