![background image](http://html1.mh-extra.com/html/barco/balder/balder_installation-manual_473885021.webp)
2. Lenses
5. Carefully remove the front cover
Image 2-6
6. Insert M4 pan head screws (not supplied) with a maximum length of 15mm in the threaded holes, indicated by the red and green
circles in the illustration below. Tighten the screws with a suf
fi
cient torque. The green circles indicate the lock for the vertical shift,
and the red circles indicate the lock for the horizontal shift. All four locking positions must be used to achieve a suf
fi
cient locking.
Image 2-7
7. Reinstall the front cover.
8. Reinstall the Projector lens.
2.6
Adjust zoom and focus
General
Zoom
controls the size of the projected image.
601–0442 BALDER 13/09/2017
17
Summary of Contents for Balder
