![background image](http://html1.mh-extra.com/html/barco/balder-gp7/balder-gp7_user-manual_473886038.webp)
601
–
0443 /03
Balder
38
3.3 Power down the projector
Power down using the keypad or remote
1.
Depress and hold the power button on the keypad or remote for four (4) seconds.
The Projector is now in cooling down phase.
2.
Wait 2 minutes before disconnecting the power cord. (If disconnecting is required).
WARNING:
There is a risk of reducing the expected lifetime of the projectors DMD device if the power cord is
removed too early, due to the device
’
s shutdown sequence.
3.4 Power mode transitions
3.4.1 General
Transition Diagram
This diagram shows all modes available on the projector (unplug, ON, READY, ECO), and the actions
necessary to change mode.
2
ECO
READY
ON
1%
50%
50%
Image 3-1
-
Projector mains powered
-
Auto transition after x minutes if ECO mode enables
-
Press power On/Off button, remote On/Off button
3.4.2 Power on projector
If not already connected, connect the female side of the power cord with the power input socket of
the projector. For more details see section dedicated to the power cord installation.
The background image of the startup screen and info screens can be changed with Projector
Toolset with an installed Balder plug-in.
Summary of Contents for Balder GP7
