![background image](http://html1.mh-extra.com/html/barco/balder-gp7/balder-gp7_user-manual_473886027.webp)
601
–
0443 /03
Balder
27
1
Image 2-8
2.8.5 Function of the RGB filter button
Filtering the color of the projected image
By pressing the RGB filter button on the RCU you can place a color filter on the output of the projector. This
feature can be useful during the installation and configuration of a multi-projector or multi-channel setup. By
having one projector project a red image and another project a green image, it is easier to spot and adjust the
overlap section.
By pressing this button multiple times, you will have different active filters, in the following cycle:
•
Red + Green + Blue (default)
•
Red only
•
Green only
•
Blue only
•
Red + Green
•
Green + Blue
•
Red + Blue
•
Red + Green + Blue
•
etc
After powering up, the colors will always revert back to full RGB.
2.8.6 Enable / Disable Remote Control
About
This function are for disabling the IR sensors for the remote control. Either front or rear, or both.
Image 2-9
•
Select the menu path
Home/System Settings/Communication/IR control
•
Select which sensors to be disabled.
•
Enter the Apply button to confirm the action
Summary of Contents for Balder GP7
