Barco B-10 Mobile LED R9855510, Installation & Maintenance Manual

Page: 28 / 47

3. Setup of the B-10 Mobile LED
Image 3-5
Safety pieces
Caution: Make sure the safety pins are placed in the mast. This is mandatory for security reason and to avoid that the mast
comes slightly down after closing the pump system.
3. Stop the pump system by closing the air arrival and switching off the pump.
4. Press the red button.
3.4 Rotating the LED display
How to rotate?
1. Rotate the display to the desired position.
2. Lock this position.
Image 3-6
Mechanical lock
3.5 Move down the LED Display
C
AUTION
:
Do not use the pump to bring down the display.
When bringing down the display too fast, oil can spill out of the hydraulic system. This is not a leak !
24 R5976956 B-10 MOBILE LED 19/06/2007