4. Operating
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
___________________________________________________________________
4-41
4.7.2
The Remote-Control clients (command line based)
In accordance with the offered services of the R
EMOTE
-C
ONTROL
daemon there are clients which use these services.
Different clients can use the same service simultaneously.
rctrlmon
The monitor client
rctrlmon
monitors the connection between client (on host computer) and daemon (on
A
RGUS
). For this purpose, the client sends periodically keep-alive-telegrams for the daemon. The daemon boots
A
RGUS
after absence of the telegrams.
The
rctrlmon
client can be started as follows:
rctrlmon [-<option>]
Following options are available:
option
argument
default
meaning
-h
<hostname>
local host
Specifies hostname or IP address, where the daemon is started.
-p
<port>
13579
Specifies port of the
rcrld
daemon. (Default should not be changed!)
-i
<KeepAliveIntervall>
5 sec
Specifies the period between two keep-alive-telegrams.
-r
<KeepAliveRetries>
10
Specifies the maximum number of missing telegrams, after which the daemon reboots
A
RGUS
.
Table 4-27
