Barco AMM215WTD, User Manual

Page: 12 / 48

R5912860 /13 AMM215WTD 12
2.1 Workspace
To prepare a suitable workspace
Before you carefully unpack your monitor, prepare a suitable workspace
You need:
• a stable and level surface
• a grounded power outlet
• an area which is relatively free of glare from sunlight or other sources of bright light
The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling
vents.
2.2 Unpacking
To unpack the monitor
• Inspect the monitor and other package contents for shipping damage that could cause a fire or shock
hazard.
• Immediately report any shipping damage to the carrier or transportation company and contact customer
service in case of return.
2.3 To connect the interfaces
To Install the Monitor
To install the monitor to your host system, please follow the steps as given below
• Use the supplied video cable (DVI, VGA, S-Video, C-Video) then connect to the host system accordingly.
• Connect the DC power to the DC power connector on the monitor.
• Connect one end of AC power cord into the AC Adapter and the other end to AC power outlet. .
• Then turn the host system on and then the monitor.
• If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the
problem..
DC Power DVI
VGA
Image 2 – 1
OUT
IN
SDI IN SDI OUT C- Video
S -Video
RGB / Component
Image 2 – 2
Installation