![background image](http://html1.mh-extra.com/html/barco/acs-2048/acs-2048_user-manual_473880098.webp)
98
ACS-2048 • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Remote Commands
oÉãçíÉ=`çãã~åÇë
This section lists ACS-2048 remote commands.
^rql^`n
•
Description
: Auto Input Acquisition Mode.
•
Command Format
: AUTOACQ -m (mode)
•
Command Params
: -m mode: 0-off, 1-on (Default: on)
•
Query Format
: AUTOACQ -?
•
Query Response
: AUTOACQ -m (mode) --min 0 --max 1
^rqlp^sb=
•
Description
: Auto Input Settings Save
•
Command Format
: AUTOSAVE -m (mode)
•
Parameters
: -m (mode): 0 - off, 1 - on (default: off)
•
Query Format
: AUTOSAVE -?
•
Query Response
: AUTOSAVE -m (mode) --min 0 -- max 1
_ihsfa
•
Description
: Puts black into the scaler selected.
•
Command Format
: BLKVID -s (scaler) -m (mode)
•
Parameters
:
-s (scaler): 1 - 2
-m (mode): 0 - off, 1 - on
•
Query Format
: N/A
•
Query Response
: N/A
System Save
Sets whether input selection of inputs w/o valid syncs will be made
Set subnet mask to be used when DHCP is OFF
Query only command for the temperature of the unit
Set transition time
Display Version info
Set VFD brightness
Table B-1.
ACS-2048 Remote Commands (Continued)
Command
Description
Page