![background image](http://html1.mh-extra.com/html/barco/acs-2048/acs-2048_user-manual_473880063.webp)
ACS-2048 • User’s Guide
63
4. Operation
Using the Main Menu
Note that the ACS-2048 measures the internal temperature for an “over-temp” condition
every 5 minutes. If the system’s internal temperature exceeds 122° F (50° C), the following
message appears:
Figure 4-36.
Over Temperature Warning
To clear the message and continue operations, press
ESC
.
rëÉê=mêÉÑÉêÉåÅÉ
From the
System Menu
, select
User Preference
to display the
User Preference Menu
:
Figure 4-37.
User Preference Menu (sample)
The following functions are available:
•
Auto Input Save
— When enabled, the system automatically saves the selected
input after it has been acquired for the first time. The field has no effect if the
Auto
Acquire
mode is
OFF
.
•
All Inputs Sel
— This preference tells the system to allow (or disallow) the
selection of inputs that do not have a valid sync signal detected.
~
When
ON
, you can select inputs that do not have valid sync (and are not
backlit).
~
When
OFF
, you cannot select inputs that do not have valid sync, and the
“
Invalid Selection
” message will be displayed if you attempt to do so.
•
Menu Context
— This preference determines the behavior of certain ACS-2048
menus. The following conditions apply:
~
When
Menu Context
is
ON
, regardless of the menu currently being
displayed, menus automatically change their context when an
Input
or
the
TEST PAT
button is pressed.
S
Example
: The
Status Menu
is currently displayed. When you
select a different input, the
Input Menu
is immediately displayed for
that input.
O V E R T E M P E R A T U R E
C o n t a c t f a c t o r y i f
c o n d i t i o n p e r s i s t s .
E S C = C o n t i n u e
Note
This message is a warning only, which does not prevent the
operation of the ACS-2048. If this message appears, it is
recommended that you contact Barco Customer Service.
U S E R P R E F E R E N C E
> A u t o I n p u t S a v e
O F F
A l l I n p u t s S e l
O F F
M e n u C o n t e x t
O F F