58
ACS-2048 • User’s Guide
4. Operation
Using the Main Menu
Note that transition times are specified for switching applications with
Auto
Acquire
turned
OFF
. When
Auto Acquire
is
ON
, the transition time is greater,
due to the additional time required to analyze the input video timing.
Transition values are listed below:
•
Adjustment range
: 1.5 - 5.0 seconds
•
Default
: 2.0 seconds
sca=_êáÖÜíåÉëë
From the
System Menu
, select
VFD Brightness
to control the intensity of the front panel
VFD (vacuum fluorescent display).
•
Adjustment range
: 1 - 15 (1 is the dimmest setting)
•
Default
: 10
bíÜÉêåÉí
From the
System Menu
, select
Ethernet
to display the
Ethernet Menu
:
Figure 4-25.
Ethernet Menu (sample)
The following Ethernet functions are available:
•
DHCP
— DHCP can be turned
OFF
or
ON
.
~
When
OFF
, the
Config Network
field appears, which enables you to
manually enter a static IP address, Subnet mask and Gateway.
~
When
ON
, the ACS-2048 queries the DHCP server for a valid IP
address, and the
Config Network
field is hidden.
•
If the ACS-2048 finds a DHCP server and receives an IP
address, the address is displayed.
•
If a server is not found, an IP address is not assigned.
Note
It is recommend that you use a low intensity setting to avoid
"burn-in" of the display.
E T H E R N E T
> D H C P
O F F
C o n f i g N e t w o r k
> >
I P
1 9 2 . 16 8 . 0 0 0. 0 0 5
M
0 0 : 0 4 : a 5 : 1 7 : 1 0 : b 0
Note
Always consult with your network administrator to obtain valid
IP, subnet mask and gateway addresses.
