WARNING
TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS
INTERFACE TO RAIN OR MOISTURE
274.DRW
screw caps
SAFETY
POWER REQUIREMENTS
Power requirements for electrical equipment differ from area to area. Please
ensure that your apparatus meets the power requirements in your area.
If the Power cord of the Interface is equipped with a ANSI
73.11 PLUG,
Factory preset Power Voltage for this interface is 120 VAC
60mA 50/60Hz.
If the Power cord of the Interface is equipped with a CEE 7
PLUG,
Factory preset Power Voltage for this interface is 230 VAC
40mA 50/60Hz.
If in doubt, consult a QUALIFIED TECHNICIAN for voltage conversion.
POWER ADAPTATION
To adapt the power voltage of the interface, the following must be strictly followed:
Warning: unplug the power cord
before proceeding to the power
voltage adaptation of the inter-
face.
1. Remove the top cover to access
the interface module.
-remove the screw caps
-remove the screws
-separate bottom from top cover
