![background image](http://html1.mh-extra.com/html/barco/70/70_installation-manual_473873019.webp)
3. Connections
3. CONNECTIONS
Overview
•
•
•
•
•
•
•
•
Digital Visual Interface (DVI) input
•
•
•
3.1 Removing the Connector cover
What is behind this cover ?
The power connector and all inputs are situated behind this cover.
How to remove the cover ?
1. Loosen the locking screw. (image 3-1)
2. Left up at the bottom and pull on the cover to loose.
The cover makes a loud ’snap’ when removed. This is normal and does not damage the cover.
Image 3-1
Removing the input cover
When all connections are done, close the cover again and fix the locking screw.
3.2 Power Connection
AC Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet.
Plug the female power connector into the male connector at the back of the projector.
Plug the male connector into wall outlet.
R5976763 CINEVERSUM 60/70 22042004
15
Summary of Contents for 70
