11
Step 15:
With the table top facing down on the ground, align the leg support assembly over the
three sets of bolts on the support brace assembly. Fasten the leg assembly to the
support braces using nine 5mm cap nuts (RC).
Note:
Tighten all loose hardware including the center braces. Stand the table upright.
Step 16:
Turn a bench leg (AE) upside down and fasten a bench leg cap (AJ) on each end of
the foot. Secure the cap to the legs with two
#8 x 1/2” screws (RE).
Note:
Repeat this step for all three benches.
set of three bolts
