8. Advanced
A dialog box is displayed
Image 8-55
6. Use
←
or
→
, the numeric keys on the remote, or the keypad to change the runtime warning setting.
W
ARNING
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
8.6
Image files
Overview
•
•
•
•
•
•
Save as (create a custom file)
•
•
•
8.6.1
Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The file is not automatically saved as a custom file.
The
Save as...
function allows to create and save a custom file.
The active file can always be edited in order to fit exactly the source specifications.
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD
File notation
The notation of the image file happens as follows :
/Standard/[email protected]
Type of file : standard or custom
Resolution
Vertical freq
file extension = xml
Image 8-56
R5976821 BARCO ICON 15/03/2007
103
