INSERTING AN iPod
11
Locate the correct Universal Dock
to use as shown on page 21.
Insert the Universal Dock (A) into
the iPod compartment (B) (as
shown), making sure the tabs are
facing front, and slip the tabs into
place. Press the rear side of the
Universal Dock until it is
positioned inside the iPod
compartment.
(A)
(B)
1
Insert the iPod Support Bracket
(A) into the two holes behind the
iPod Compartment (B) (as shown).
(A)
(B)
(B)
2
The iPod will charge as long as
this unit is connected via the
AC cord.
Please see the next page for
instructions on using an iPod with
this unit.
4
Slide the iPod (A) into the
Universal Dock (B) (as shown).
Gently push down so the
connector on the iPod slides onto
the connector on this unit.
(A)
(B)
3
NOTES:
•
For better AM radio reception, the iPod will not charge while in AM radio mode.
•
To remove the Universal Dock, insert your finger (or other object) into the gap
in the Universal Dock, then gently pull the Universal Dock out to remove it.
