background image

N2892pr-0920

14

Teach Safety Rules to Children

While children can quickly develop the skill necessary to drive this 
vehicle, it is important to remember that their judgment skills are still 
very immature. Unsupervised driving by children can lead to serious 
injury. Before children use this vehicle, an adult should carefully 
evaluate the driving area as well as the children’s skill level and ability 
to drive this vehicle safely. Children are not always able to recognize 
or anticipate hazards, even when they have been taught about them. 
There is no acceptable substitute for direct adult supervision.
Teach appropriate safety rules to your child before allowing operation 
of this vehicle. These rules should also be reviewed with neighborhood 
children or other playmates who want to drive this vehicle. 

Riding Rules

 Make sure children know and follow these rules for safe driving:

   1.  Always sit on the seat.

   2.  Always wear shoes.

   3.  Only 1 (one) rider at a time. A child who is not sitting on the seat or 

who is standing on the vehicle could fall off, cause a tip-over or block 
the driver’s view. A child could be seriously injured. 

   4.  Do not allow any child to drive the vehicle in the street or near moving 

(motorized) vehicles. 

   5.  Do not allow any child to drive near bodies of water (such as pools 

or creeks), obstructions (such as furniture, low tree limbs or play 
equipment), or drop-offs (such as stairs or decks).

   6.  Do not allow any child to drive the vehicle in the dark. A child could 

encounter unexpected obstacles and have an accident. Operate the 
vehicle only in the daytime or a well-lit area.

   7. Do not allow your child to drive on sloped or inclined surfaces.  

 

    Restrict your child’s driving to generally level ground ONLY!

   8.  Do not allow your child to drive down or across a steep slope. 

    -  The vehicle may gain unsafe speed, even if the button is released 

to stop.

    -  The vehicle may tilt and tip over. 

    -  The wheels could lose traction, causing the vehicle to slip.

  9.  Do not allow your child to drive up steep inclines. The motor may stop 

and the vehicle could roll backwards at an unsafe speed.

10.  Never put anything near any moving parts. Rotating parts such as 

motors, gear boxes and wheels can snag fingers, hair, etc., causing 
serious injury. Do not allow operation of the vehicle when it is on its 
side or in an upside-down position.

11.  Do not operate the vehicle near flammable vapors (gasoline, paint 

thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches, 
like most electrical switches, emit an internal spark when first turned 
on or turned off. The presence of flammable liquids or vapors could 
cause an explosion or a fire. Keep all flammable products in tightly 
sealed containers and away from the vehicle.

12.  Do not allow a child to operate the vehicle without direct adult 

supervision. To prevent unsupervised use of the vehicle, disconnect 
the motor harness from the battery connector when the vehicle is not 
in use.

 RIDING HAZARD

• 

Prevent Injuries and Deaths

  •  Direct Adult Supervision Required.
  •  Never Ride At Night.
 •  

Keep Children Within Safe Riding Areas. 

    These areas must be:
   -  

away from swimming pools and other 
bodies of water to prevent drownings

    - generally level to prevent tipovers
   -  

away from steps, steep inclines, cars, 
roads and alleys.

 • Riding Rules
     Make sure children know and follow

these rules for safe driving and riding.

    - Always sit on the seat.
    - Always wear shoes.
    - Only 1 (one) rider at a time.

WARNING

Use vehicle on generally level ground ONLY!

SAFE DRIVING RULES

Summary of Contents for LIL' QUAD N2892





















Reviews: