Installation Instructions for Models BTESB14ALP & BTESB14ANG
CAUTION
: Even though it is possible for one person to install this grill, it is better to obtain assistance from
another person when handling the large, heavy pieces.
1
Install Grill Head
With the help of your assistant, lift the grill head and place it into the cutout of your island (See Diagram).
The island shown in the diagram is for illustrative purposes only. Not to scale.
The left cabinet is for a gas
tank
NOTE:
The grill head you purchased is to be installed on the island which is not included in this purchase. Before
building your grill island, please read the construction guidelines and clearances in
Fig.3
on
page 8
carefully.
7
Manifold
Swivel Nut
Vertical
Fitting
12' Natural
Gas Hose
(Sold separately)
Island shown for illustrative purposes only.
2
For NG model(BTESB14ANG), install Natural Gas(NG) Regulator and 12 Foot Hose
Connect the NG regulator to the inlet of gas manifold. (
See Fig. 1
)
Connect the swivel nut of the 12 ft. NG hose(Not provided) to the vertical fitting of the NG Regulator.
NOTE: Make sure the 12 ft. NG hose stays away from sharp edges.
WHEN YOU FINISHED THIS STEP, PLEASE SKIP TO STEP 4.
Figure 1
