OPERATING YOUR BARBEQUE
1. WARNINGS:
•
Before using the barbeque please ensure you have read and understood the entire instructions
manual.
2. PRIOR TO COOKING:
•
It is advisable to wash the cooking surface with soapy water, then apply a light coating of cooking
oil before starting to cook.
•
When you are lighting your barbeque for the first time, read the following “STARTING THE
BARBEQUE” to light the barbeque. Turn the burners to the “
LO
” position and leave it running for
15 minutes. Your barbeque is now seasoned and ready for first use.
Note: It is quite normal for the paint colours on the grill and hot plates to change during the
first few cooking sessions.
3 STARTING THE BARBEQUE:
•
Ensure that all the controls are in the “
OFF
” position before attempting to light the barbeque.
•
Turn on the gas supply at the gas cylinder.
•
Select burner to light. Push and turn the selected control knob to “
HI
” (automation ignition).
• I
f ignition does not occur within 5 seconds, turn burner control knob to “
OFF
”. Wait 5 minutes and
repeat the lighting procedure.
4 MANUAL LIGHTING:
•
Light a 90mm barbeque match or a lighting gun and hold adjacent to the burner underneath the
right end of the barbeque.
•
Ensure the match remains lit then turn the right hand control knob to the “
HI
” position, the burner
will light from the match.
• Once the burner is lit, repeat the process for the remaining burners.
• Each burner can be adjusted to a low heat setting by turning the control knob to the “
LO
”
position.
DO NOT TURN A CONTROL KNOB ON UNTIL A LIGHTED MATCH IS INSERTED UNDER THE BARBEQUE
5. AFTER COOKING
•
Ensure ALL control knobs are turned “
OFF
” by turning them fully clockwise.
•
Once the burners have extinguished turn the gas “
OFF
” at the gas cylinder.
•
The barbeque should then be stored in accordance with the storage guidelines in this manual.
:
•
See cleaning instructions on the following page.
L
