SAFETY INFORMATION
When using any electrical appliance ,basic safety precautions should always be observed .
READ THESE INSTRUCTIONS CAREFULLY
.
Keep them in handy for future reference .
□
This appliance is intended to warm and dry towels and therefore is hot to the touch .
When used by or near young children or infirm persons ,close supervision is
necessary .Young children should be supervised to ensure that they do not play with
the appliance .
□
Any rise in ambient temperature is directly reflected in the appliance, and as a result
of this ,the appliance will feel hotter to the touch during warmer periods.Also the
insulation effect of towels will cause the operation temperature to increase slightly .
□
The appliance is to be installed so that switches and other controls cannot be
touched by a person in the bath or shower .
□
DO NOT use this appliance for any purpose other than its intended use .
□
To avoid a hazard this heated towel rail MUST NOT be used to carry towels or any
other articles that have been in contact with oil, petroleum based products or dry
cleaning fluids .
□
Use this appliance only with the voltage specified on the rating label, or elsewhere
in these instructions.
□
Regulations require that electrical work be carried out only by authorised
persons .For your own safety and that of others ensure this is done .
□
DO NOT immerse in any liquid .
□
For service contact your nearest Authorised Service Agent .
□
WARMING :In order to avoid a hazard for young children ,this appliance
must be installed so that the bottom rail is at least 600mm above the floor .
INSTALLATION
Mounting towel rail :
Please note: We advise that the towel rail should be installed by a professional .
Please read the safety information on the previous page carefully before mounting .
1,
First ,confirm which method of cord entry your bought from shop ,exposed or
concealed wiring. Then connect the "Non Flex " leg to the bottom of the towel rails
that will not house the electric flex (After removing the fixing barrel & making sure
the grub screw will face the floor).Also before attaching the leg, make sure the cap
that covers the electrical connection/ wires is in place .
2 ,
Select desired spot to mount towel rail with at least 300mm clearance from all
permanent objects in surrounding area and 600mm above the floor .The ladder towel
rail should be installed in accordance to local Australia governing regulations .
The heated towel rail can only be mounted 1 way .Your towel rail is mounted by
brackets with a single screw on each of the 4 brackets at the indicated spots in
