33
UNIVERSAL-6 80
Installation instructions
• During installation of the appliance, a clearance of 3 mm should be maintained on all
sides of the appliance to allow for expansion of the appliance during operation.
•
If the appliance is to be placed against a bearing wall or against a wall containing
fl ammable material, an air gap of at least 20 mm should fi rst be created
.
Before it a false wall, 100 mm thick, must be built of masonry or aerated concrete
.
•
If the appliance is not placed against a bearing wall or a wall containing fl ammable
material, no false wall is necessary. Layers of insulation of at least 100-mm thickness
will then be suffi cient (class A1, DIN 4102-compliant). See also section 3.3.
•
After four weeks, your appliance will be ready for use
.
3.3.5
Connecting the smoke outlet
The appliance comes with a detachable smoke outlet connection
, Ø180 mm (Ø17
8 mm
external). This connection is intended for steel pipes, double/single-skinned stainless
steel (insulated) fl ues or double/single-skinned fl exible stainless steel fl ues.
After the appliance has been installed, it can be connected to the fl ue.
In order to be able to disassemble the smoke outlet connection, remove the brake
plates fi rst.
•
Disassembling the smoke outlet connection
.
Summary of Contents for Universal-6 80
