6.2.7
Clean the anti-reflective glass
Warning:
Before the start of this procedure make sure the appliance is off
and cooled down to room temperature.
Caution:
• Do not use hard (scouring) sponges, steel wool, abrasive products, caustic
products, or cleaning agents that contain ammonia. The use of these items
on the glass can damage the coating layers.
• Use neutral cleaning agents to clean the glass. This includes products like
'Instanet' or 'Glassex'.
1.
Clean the glass with a soft cloth or a sponge.
2.
Make sure that the glass is dry. Water droplets can leave a mark on the coating.
6.2.8
Replace the ambient light bulb when broken
Warning:
Before the start of this procedure make sure the appliance is off
and cooled down to room temperature.
1.
Turn off the power supply to the appliance.
2.
Remove the glass pane. Refer to chapter
3.
Remove the burners and burner bed. Refer to chapter
4.
Carefully unscrew the broken light bulb from the ceramic fitting.
Figure 41. Position of ambient light bulbs
Maintenance
Gas Fire Front 70-60
63
Summary of Contents for Gas Fire Front 70-60 PF2
