background image

IItem

Description

C

Chimney

The chimney extracts the flue gases from the appliance.

D

Ventilation air outlet The heated air in the chimney breast is extracted by the outlet open-

ings into the room. This prevents overheating of the chimney breast.

E

Insulating material

The appliance insulation to keep the heat inside the appliance

F

Air supply

Provides the room with air for the appliance.

G

Adjustable feet

4 adjustable feet to level the appliance.

Installation with external combustion air supply, with convection package and convection

ventilator

Item

Description

A

Combustion air inlet Provides the appliance with external combustion air. A flexible alumi-

num pipe is connected between the combustion air inlet box and the

outer side of the house.

B

Convection air inlet

opening

Provides air for the convection ventilator. A flexible aluminum pipe is

connected between the convection air inlet opening and the convec-

tion air box.

C

Ventilation air inlet

opening

Inlet opening for air for ventilation of the chimney breast.

D

Chimney

The chimney extracts the flue gases from the appliance.

E

Insulating material

The appliance insulation to keep the heat inside the appliance.

F

Convection air out-

let

The heated air is extracted through flexible aluminum pipes by the out-

let grate into the room.

G

Ventilation air outlet The heated air in the chimney breast is extracted by the outlet grate in-

to the room. This prevents overheating of the chimney breast.

H

High adjustable feet

(option)

Set of 2 adjustable frames with 2 adjustable feet each to put the appli-

ance on a higher position.

Description

Falcon 66/56

13

Summary of Contents for Falcon 66/56









































Reviews: