1
Declaration of Performance
1.1
BOX
30
75
1.
Unique identification code of the product-type
2.
Intended use or uses of the construction product, in
accordance with the applicable harmonised technical
specification, as foreseen by the manufacturer
3.
Name, registered trade name or registered trade
mark and contact address of the manufacturer as
required pursuant to Article 11(5)
4.
Where applicable, name and contact address of the
authorised representative whose mandate covers the
tasks specified in Article 12(2)
5.
System or systems of assessment and verification of
constancy of performance of the construction
product as set out in Annex V
6.
In case of the declaration of performance concerning
a construction product covered by a harmonised
standard
7.
Declared performance
Fire safety
Distance to combustible materials
Minimum distances, in mm
Rear =
300
Sides =
300
Ceiling =
-
Front =
1800
Floor =
30
NPD
Thermal output
Energy efficiency
8.
Signed for and on behalf of the manufacturer by:
Danny Baijens, CEO
(Name and function)
Bladel; June 1, 2022
………………………………………………………………………..
(place and date of issue)
(Signature)
EC-declaration of conformity
This EC declaration of conformity applies to the product described below and describes the conformity with the following
directives:
2009/125/EC Directive for the setting of eco-design requirements for energy-related products (eco-design directive)
Relevant Regulation: (EU) 2015/1185
Release of dangerous substances
Pass
Emission of combustion products
Mechanical resistance (to carry a chimney/flue)
Surface temperature
Risk of burning fuel falling out
Pass
Declaration of Performance
According to regulation (EU) 305/2011
No. 1.232-082-2 - CPR-2013/07/01
BOX30 75
Room heater without hot water supply
Barbas Bellfires BV; Hallenstraat 17; 5531 AB Bladel; The Netherlands
Not applicable
System 3
The notified laboratory SGS Nederland BV, No. 0608 performed the
determination of the product type on the basis of type testing under system
3 and issued test report EZKA/2022-01/00027-3
Harmonized technical specification
EN13240:2001/A2:2004/AC:2007
Essential characteristics
Performance
CO = 0.1 vol%
Pass
Pass
Nominal heat output
14.4 kW
Room heating output
14.4 kW
Electrical safety
Pass
Cleanability
Pass
Maximum operating pressure
Not applicable
Flue gas temperature at nominal heat output
T = 327 °C
75.3 %
NPD
The performance of the product identified in point 1 is in conformity with the declared performance in point 7.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 3.
Water heating output
kW
Declaration of Performance
BOX 30 75
5