Barazza 1MOA, Instructions For Use Manual

Page: 6 / 28

6
• BEFORE CONNECTION
Warning:
Ensure that your appliance has
not suffered any damage during
transport (bent door or seal, etc.). If
you notice any kind of damage, contact
your
retailer before using the
appliance.
In order to easily locate the make,
model number, etc. of your appliance,
we recommend that you note this
information on the “After-Sales Service
Department and Customer Support”
page.
• ELECTRICAL CONNECTION
Ensure that:
- The electrical installation has sufficient
voltage.
- The electrical wires are in good
condition.
- The diameter of the wires complies with
the
installation requirements.
- Your electrical installation is equipped
with
15-ampere thermal-sensitive
protection.
If in doubt, consult your electrician.
The appliance is not supplied with a plug
the cable must be connected directly to
the mains, this must only be done by an
authorized person in accordance with
current regulations in the country where
the appliance is installed.
Electrical
connections should be
completed before the appliance is placed
in the wall unit. The appliance must be
recess-fitted correctly to ensure electrical
safety.
During recess fitting and
maintenance operations, the appliance
must be disconnected from the mains;
fuses must be cut off or removed.
The isolating switch must remain
accessible after the appliance is installed.
Your electrical installation should include
an accessible feature that allows users to
disconnect the power supply.
If the power cable is damaged, it should
be replaced by the manufacturer, its after-
sales service or a similarly qualified
person so as to prevent a hazard.
Important:
We cannot accept liability for any
accident or incident resulting from non-
existant,
defective or incorrect
grounding.
If the oven malfunctions in any way,
unplug the appliance or remove the
fuse for the oven’s connection line.
•
The appliance must be installed inside
the built-In frame (fig. 2A on page 7),
or behind a lift-up door (fig. 2B on page
8).
•
Place the oven on a flat and horizontal
surface, away from any source of heat or
steam. To ensure the stability of the
microwave oven, the front left foot is
adjustable (5 positions). Turn it to raise
or lower the appliance.
•
Make sure that air may circulate freely
around the oven.
•
Make sure that nothing obstructs the
ventilation louvers at the back of the
appliance.
•
Do not use your appliance immediatly
(wait approx. 1-2 hours) after transfer
from a cold place to a warm place as
condensation may cause a malfunction.