Normal Grinding Operation
Press the desired button (Espres-
so, Filter or Press). The blue LED
next to the button will light and the
display LCD will show the corre-
sponding programmed grind time
in seconds. Press START button
to begin grinding. While grinding,
the LCD will count down the sec-
onds to 0. When the LCD reaches
0 seconds, the motor will stop and
the display will reset again to the
programmed time. For greater
quantities of ground coffee, press
the MANUAL button then START.
The grinder will count up to a limit
of 120 seconds then shut off auto-
matically. At any time during MAN-
UAL, you can stop the grinding by
pressing the START button. The
motor will stop and the LCD will
reset to 000. The limit of 120 sec-
onds is not user adjustable.
Programming Grind Dosing
Times
The VARIO
™
is equipped with
three programmable dosing grind
times. The buttons are convenient-
ly labeled for Espresso, Filter and
Press. These programmable but-
tons only adjust the grinding TIME,
they do not adjust the coarseness
of the grind. Each button comes
from the factory with a preset time:
Espresso: 10 seconds, Filter: 20
seconds and Press: 30 seconds.
If the grinder is unplugged, the
grinder resets to the factory-pre-
set times. After adjusting the grind
(particle size) to your desired set-
ting, press the desired button, and
then press START. The grinder will
run and the display will count down
from the preset time.
The grinder will stop automatically
when time reaches 0. To stop at
any time during grinding, just press
the START button again. Depend-
ing on the amount of coffee ground,
you can easily program more or
less grinding time as follows:
1.
Press the up or down arrow just
below the LCD display to adjust
the time. Press and hold the arrow
for 3 second to advance the time
more quickly.
