WARNING: The Sette grinds at a very high speed, be careful not to
overfill your portafilter or bin! If a mound of coffee backs up into the
chute it will clog the grinder.
Programming:
The Sette 270Wi is equipped with three programmable buttons
(13)
.
The buttons are simply labeled 1, 2, 3. These programmable buttons
only adjust the desired grind weight, they do not adjust the grind
setting (i.e. coarse/fine). Each button comes from the factory with
the following presets: Weight: 1=18g, 2=25g, 3=35g.
You can easily program more or less grams as follows:
1.
Select a preset button.
2.
Press the up or down arrow buttons to adjust the weight.
3.
Once you have reached the desired gram setting, press and
hold the desired preset button for 3 seconds. The screen will
blink to confirm the setting is stored.
4.
To program the other buttons repeat steps 1-3.
NOTE: 5g
minimum for preset mode: The software prevents users from
setting a preset below 5g. Due to the speed of the grinder, it is
unable to be accurate for weights less than 5g.
• For best dosing accuracy, we recommend assigning a particular
grind size to each preset (e.g. Preset 1 for espresso, 2 for
AeroPress®, 3 for drip) — see owner’s manual for more detail
Bag of Tools:
We have included a small bag with tools and shims
(22)
.
• Shims used for recalibrating the machine to a finer range.
• 2mm hex key used for adjusting the portafilter hook.
• 5mm hex key used for removing the cone burr from the holder
when shimming (see manual).
Need Help?
If you have any questions or concerns, please email:
or call +1 (425) 641.1245
The full manual can be found on our website at:
baratza.com/documentation
For video instructions and troubleshooting guides:
baratza.com/troubleshooting
SAFETY INFORMATION:
!
Please read the information below very carefully. It contains
important safety information for this appliance. Please keep these
instructions for future reference.
!
Use only with AC current and the correct voltage. See the label on
the base of the grinder to determine the correct voltage.
!
Only clean the grinder housing with a dry or slightly damp cloth.
Do not immerse the grinder, plug or cord in water or any other
liquid.
!
Baratza will not accept any liability for damage, injury, or warranty
if the grinder is used other than for its intended purpose (i.e.
grinding roasted whole coffee beans) or is improperly operated
or repaired.
!
Keep the appliance and its cord out of reach of children aged less
than 8 years
!
Do not operate the grinder with a damaged cord or plug. If the
supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid
a hazard
!
Do not leave your grinder unattended while turned ON.
!
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
!
Cleaning and user maintenance shall not be made by children
without supervision.
!
Always unplug the grinder from the electrical supply before
assembling, disassembling or cleaning.
!
To unplug, grasp plug and remove from the outlet. Never pull on
the cord.
!
CAUTION: ALWAYS unplug the electrical supply cord prior to
cleaning the grinder.
