background image

6

Setting

Type of Coffee

Grind

1 to 14

Espresso

Fine

16 to 32

Filter / Drip

Medium

34 to 40

Press

Coarse

(clockwise) produces a smaller particle size.   The actual grind size for a 

particular setting will vary depending on many factors, including:  degree 

of roast (light vs. dark), freshness, humidity, type of bean, oil content, etc.  

With use, you will determine the setting that is right for your taste, brew-

ing style and your favorite beans.

Note: 

Partially ground coffee beans may remain between the burrs after 

the grinder is turned off, adjusting the grind may be easier when the 

grinder is running.  Avoid running the grinder at very fine settings without 

beans as it can damage the burrs.

Adjustable Self Timer

The PRECISO is equipped with a 60 sec-

ond timer switch. Each segment around the 

timer represents about 10 seconds of run 

time.  The grinder switches off automatically 

once the time has elapsed.  If you want 

to interrupt grinding 

before the time has 

elapsed, simply turn 

the timer switch coun-

terclockwise until the grinder switches off.

The quantity of ground coffee you need depends on 

the type of bean, coarseness of the grind, brewing 

method and personal taste.  With use, you will find 

the most suitable settings for your personal taste.

Summary of Contents for Preciso

















Reviews: