![background image](http://html1.mh-extra.com/html/baratza/forte/forte_manual_3787608004.webp)
4
3. Loosen the motor tension screw, but do not remove it from the tension mount.
4. Remove the two Phillips motor mount screws (#1291) holding the motor in place using the offset
Phillips ratchet.
5. Unplug the motor from the main power board.
6. You will find it easiest to set the grinder on its face. Unplug all of the connectors that go
into the circuit board. ** Take note where all of wires plug into on the board- they must
go back in the same exact way.