Baracoda Pencil2 – User Guide v1.4
- 5 -
Data Capture
for Workforce
in Motion
PDA stylus
The Baracoda Pencil2 can also be used as a PDA stylus, by applying the optical sensor on the PDA screen.
Recharging the battery
Recharge the internal battery by using the included AC adapter. The Adapter rating is 5V, 500mA.
When the scanner is charging, the LED is red (solid).
When the scanner is fully charged, the LED will shut off (no light).
A full recharge (from completely drained batteries) takes approximately 1 hour and 30 minutes.
When the original batteries wear out, please contact your Baracoda reseller for replacements.
Warning:
Pencil 1 charging adaptors (9V) are not compatible with Pencil 2
Switching on the reader
Remember to fully charge the battery before first use.
In order to switch on the scanner, please press the trigger button. You can set up the scanner to be switched on
only after keeping the trigger pressed for two seconds.
The scanner will switch off after some period of inactivity. The default time period is ten (10) minutes of
scanner inactivity if the device is not connected via Bluetooth, and twenty (20) minutes of scanner inactivity if
the device is connected via Bluetooth and if the user don’t press the trigger button. These default values can be
modified by the end user.
All manuals and user guides at all-guides.com
