Baracoda D-Fly – User Guide v1.6
- 14 -
Data Capture
for Workforce
in Motion
7.4.
Data format
The data format is the following :
Header
General_Prefix
Symbology_Prefix
Barcode
Symbology_Suffix
General_Suffix
7.4.1.
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
•
to use the Baracoda keyboard emulation (Kemul) and Terminal.
•
to use the “No data loss” mode.
You can configure Baracoda Header through BaracodaManager software.
The Baracoda header is enabled in default settings.
7.4.2.
General Prefix / Suffix
A prefix and/ or suffix can be added to every barcode sent to the host device. You can configure prefix/suffix
through BaracodaManager software or with the Programming Guide.
There is no prefix/suffix in default settings.
7.4.3.
Symbology Prefix / Suffix
A prefix and/or suffix can be added to a specific symbology barcode sent to a host device.
Meaning a certain prefix/suffix will be added while reading a specific symbology.
You can configure prefix/suffix through BaracodaManager software.
There is no “symbology prefix/suffix” in default settings.
7.4.4.
Barcode Identifier
The scanner can transmit a maximum of 3 digit barcode identifier codes for different types of barcodes
(symbologies).
If the option is selected, the barcode identifier is added at the beginning of the barcode frame.
List of identifier codes can be found in the Programming Guide. You can activate barcode identifier through
BaracodaManager software or with the Programming Guide.
The barcode identifier is disabled in default settings.
