Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx
Page 8 / 39
Date: 31/03/2020
3
Product description
3.1 System overview
The Bär SmartControl 2.0 system is available in different options, which are defined by the range of
functions.
A system consists at least of a hand-held transmitter and a receiver. Depending on the system scope,
additional system components, e.g. the docking station, are available.
3.1.1
Bär SmartControl 2.0 remote control
The Bär SmartControl 2.0 remote control system corresponds to the functional scope of the Bär
SmartControl remote control and consists of a receiver and the Classic Batt hand-held transmitter (Mat. no.
200008452). The basic functions (“Lift”, “Lower”, “Close” and “Open”) can be selected with the hand-held
transmitter.
The system has the following additional functions:
RadioKey
45° stop
3.1.2
Bär SmartControl 2.0 Plus
The Bär SmartControl 2.0 Plus system consists of the receiver and the Plus Batt hand-held transmitter (Mat.
no. 200008454). In addition to the functional scope of the Bär SmartControl 2.0 remote control system, the
system has the following additional functions:
Selection of the “Drive In” and “Drive Out” functions
Selection of additional functions
3.1.3
Bär SmartControl 2.0 Plus with docking station
The Bär SmartControl 2.0 Plus system with docking station consists of the receiver, the docking station and
the hand-held transmitter Plus accumulator (Mat.no. 200008469). In addition to the functional scope of the
Bär SmartControl 2.0 Plus system, the system has the following additional functions:
Charging function and loss protection for the hand-held transmitter
Visual output of the feedback signal when the hand-held transmitter is in the docking station
3.1.4
Bär SmartControl 2.0 cabin control
If the vehicle has a camera monitoring system with which the danger zone of the Cargolift to be actuated can
be monitored at all times, the Bär SmartControl 2.0 cabin control can be used. Details of a suitable camera
monitoring system can be found in the document with DIS no. 40000001583. The Bär SmartControl 2.0 cab
control system consists of the receiver, the docking station and the hand-held transmitter Plus accumulator
(Mat.no. 200008469). In addition to the functional scope of the Bär SmartControl 2.0 Plus system with
docking station, this system has been expanded to include cabin control functions. With this system option,
the Cargolift (or in the case of a truck and trailer unit, the Cargolifts) can be operated from the driver's cabin.
In addition, the hand-held transmitter must be inserted into the docking station.
In addition to the SmartControl 2.0 system components, this system contains the Scharfenberger license.
This allows the attachment of orientation lines to the monitor. The customer is responsible for the execution
and attachment.
The camera system is not supplied by Gerd Bär. The assembly company is responsible for the proper and
professional mounting of the entire system, as well as for observing and complying with the applicable laws and
standards.
The use of the cabin control function is not permitted without a proper camera system!
