ASSEMBLY INSTRUCTIONS
1.
Open polisher lid.
2.
Locate the buckle on the black band and open it to remove the black band from
the drum before using the polisher.
3.
Close polisher lid.
4.
Pour (one 4.4lb bag for CP-3000
OR
two and a half 4.4lb bags for CP-7000) granulate
through chute, into drum.
OPERATING INSTRUCTIONS
For Best Results:
It is very important that the cutlery is washed and free from grease and food residue.
To ensure the cutlery is properly washed, do not overfi ll tray when loading dishwasher.
Leave forks, knives and spoons mixed to avoid nesting that may inhibit food removal.
Cutlery must be wet when it enters the polisher.
To ensure this, the cutlery should
be placed in the polisher immediately after removal from the dishwasher, or place cutlery in
a tray of warm water after removing from dishwasher to keep wet while feeding polisher.
1.
Plug power cord into grounded GFCI outlet.
2.
Press ON/OFF button to turn polisher ON.
3.
Allow polisher to preheat until the yellow operate
lamp is illuminated (about 30 minutes). Drum
and granulate will be approximately 120˚F. It is
now ready to use. Monitor yellow operate lamp,
continuing to operate when illuminated and
waiting to insert additional cutlery when it is
not illuminated.
Buckle
Black Band
Chute
4.
Pull out drawer at bottom of polisher and place the included dish rack on it to collect
the polished cutlery as it exits the machine.
5.
Manually feed (4 to 5 pieces for CP-3000
OR
8 to 10 pieces for CP-7000) of cutlery at
a time
horizontally
through the chute with handles pointing toward front of machine,
waiting for the cutlery to disappear from view (about 5 to 6 seconds) before placing
the next batch of cutlery into the chute. This is important to prevent cutlery from
becoming jammed. The fi rst polished pieces of cutlery should start exiting the polisher
in about 30 seconds.
6.
If some granulate exits the polisher with the cutlery while operating it, just tip it back
from the collection tray into drum when polishing is fi nished.
7.
When fi nished polishing cutlery, operate polisher without cutlery for 15 minutes to fully
dry granulate. Then press ON/OFF button to turn polisher OFF.
✓
Chute
Drawer
