bar aid 400, Installation And Operation Instruction Manual, Page: 8 / 16

8 1618-A-01-09
dE
GB
F
nl
staRt-up
Push
start
button
➁
. At the temperature indicator
wash ➄
appears
"
- - 1
". Wait until the indicator displays "
- - 0
".
Close the door.
The machine switches off and is now ready for operation.
4.4 pRImInG thE suctIon hosEs
attEntIon:
the machine has to be switched off.
open the door.
Push
program
button
➃
and
drain
button
➂
simultaneously until the
upper
display ➄
shows "
boF
".
Push program button repeatedly, until " h02 " is displayed.
close the door.
In the upper display appears " sF1 ", in the lower one " 0 ".
4.4.1 dEtERGEnt suctIon hosE
To prime the detergent suction hose between the injector and
container:
Push and hold
start button ➁ for 1 minute approx.
4.4.2 RInsE aId suctIon hosE
To prime the rinse aid suction hose between the injector and
container:
Push the
program button ➁ again.
In the upper
display ➄
appears "
sF2
", in the lower one
➃
"
0
".
Push and hold
start
button
➁
for
3 minutes
approx.
By using a longer suction hose, hold the start button about
6 minutes .
4.4.3 tERmInatIon oF hosE pRImInG
do not press any button for 10 seconds.
–
–
–
–
–
–
–
–
–
–