Installation & Operating Instructions
Temperature Sensor Transmitters
BA/(T100, T1K, T10K) Temperature Transmitters
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
Specifications subject to change without notice.
rev. 04/18/13
22199_ins_T1K_T100_XMTR
1 of 4
The BA/T100 units are 4 to 20mA loop powered transmitters that can be ordered with separately purchased 100Ω (385) platinum
RTD. The BA/T1K units are 4 to 20mA loop powered transmitters that can be ordered with separately purchased 1KΩ (385)
platinum RTD. The BA/T10K units are 4 to 20mA loop powered or 0 to 5VDC or 0 to 10VDC transmitters that can be ordered
with separately purchased 10K-2, 10KΩ type 2 thermistors. T100 and T1K transmitters come with flying leads but terminals are
available (-TS). Terminals are not available on the T10K units.
Fig 1:
BA/T1x-XOR-TS
Transmitter w/ plate mount
Fig 3:
BA/T1x-XOR-TRK
Transmitter w/ Snaptrack
Fig 5:
BA/T1x-XOR-BB2
Transmitter in BAPI-Box 2 (BB2)
Fig 7:
BA/T1x-XOR-(EU, EUO)
Transmitter in Weather Tight (EU) Enclosure
Fig 2:
BA/T1x-XOR-STM-TS
Transmitter only
Peel off
mounting tape
Fig 4:
BA/T1x-XOR-BB
Transmitter in BAPI-Box (BB)
Fig 6:
BA/T1x-XOR-WP
Transmitter in Weatherproof (WP) Enclosure
Fig 8:
BA/T1x-XOR-EUM
Transmitter only (fits inside Weather Tight (EU) Enclosure
6
6
Overview
Identification
