Baoli CPCD20 Operation And Service Manual Download

Page: 79 / 102

Fig7.1 Mast

1. Outer

Outer mast

mast

4. Tilt

Tilt cylinder

cylinder

7. Lift

Lift bracket

bracket

2. Inner

Inner mast

mast

5. Load

Load backrest

backrest

8. Fork

Fork

3. Lift

Lift cylinder

cylinder

6. Lift

6. Lift chain

chain

7.1 General

7.1 General description

description

The lifting system is the type of lifting and descending vertically with the two-stage

rollers. It consists of the inner mast, the outer mast and the lift bracket.

7.1.1 Inner and outer mast

The inner and outer masts are welded parts. The bottom of outer mast is connected

with the drive axle

with the drive axle through supporting. At the outside middle of outer mast,

through supporting. At the outside middle of outer mast, it is connected

it is connected

with the frame by

with the frame by the tilt cylinder. The mast can be tilt

the tilt cylinder. The mast can be tilt forward and backward by operating

forward and backward by operating

the tilt cylinder. The outer mast is made of C-shaped channel and main rollers and side

rollers are assembled on the upper part of i

rollers are assembled on the upper part of it. The inner mast is m

t. The inner mast is made of J-shaped channel

ade of J-shaped channel

and there are main rollers and side rollers at the bottom of it.

Notice:

Please pay more regard to safety when maintaining the main rollers

Please pay more regard to safety when maintaining the main rollers and side

and side

rollers on the upper of outer mast.

7.1.2 Lift bracket

The lift bracket moves up and down smoothly along the channel of the

The lift bracket moves up and down smoothly along the channel of the inner mast by

inner mast by

the main rollers. The main rollers mounted on the main roller shafts and blocked by snap

rings. The main roller shafts are welded on the lift bracket. The side rollers fitted on the lif

rings. The main roller shafts are welded on the lift bracket. The side rollers fitted on the liftt

https://www.besttruckmanuals.com/

Summary of Contents for CPCD20







































































































Search results

Summary of Contents for CPCD20

Reviews:

Related manuals for CPCD20

Brands by name

Popular brands

Baoli CPCD20, Operation And Service Manual

Search results

Summary of Contents for CPCD20

Reviews:

Related manuals for CPCD20

Brands by name

Popular brands