Baofeng UV-6, User Instruction

Page: 5 / 10

5
Auxiliary Functions
Working Channel Number 128
128 channels into eight groups and 16 channels for each group.
Channels 1-16 1
st
group Channel 65-80 5
th
group
Channels 17-32 2
nd
group Channels 81-96 6
th
group
Channels 33-48 3
rd
group Channels 97-112 7
th
group
Channels 49-64 4
th
group Channels 113-128 18
th
group
Channel selector can only select the channel in the current group. In different selector positions, press
and hold [PF1] to power on and begin the group settings.
Selector position Group Channel Range
1 1 1-16
2 2 17-32
3 3 33-48
4 4 49-64
5 5 65-80
6 6 81-96
7 7 97-112
8 8 113-128
For example:
The 1
st
first group (channel 1-16). First turn off the transceiver, rotate the channel selector at “ No.1 ” , then
press and hold [PF1] button to power on. Set the group channel like this.
While Channel switch in the “ No.9 ” , ” No.10 ” , ” No.11 ” , ” No.12 ” , ” No.15 ” position, press and hold [PF1]
button to switch on or off the following functions.
Channel Switch Position Function
9 VOX ON/OFF
10 TDR(Dual watch/dual reception) ON/OFF
11 Confirmed Tone via Repeater ON/OFF
12 Ending Tone of Transmitting ON/OFF
15 Chinese /English Switch
Working Frequency
VHF/UHF dual band frequency can be set via PC programming software in any VHF/UHF designated
range within 128 channels. Different frequencies can also be set up in the same channel, and eventually
cross band transmitting and receiving can be done.
Dual Channel Standby
υ
This transceiver can acheive dual channel standby in the selected channel (selected by selector
position) and designated channel
（
another channel designated by PC programming software .
When dual standby is switched on, both selected channel and designated channel stay in the
transceiver and dual watch
）
.
υ
Rotate the selector at “ No.10 ” , press and hold [PF1] button to switch ON/OFF dual channel standby
function. If the designated channel by PC programming software has no parameters, dual channel
standby can
’
t be switched on.
υ
While dual channel standby is switched on, FM radio has to be closed.
υ
[PF1] becomes [PTT] button of designated channel. While dual channel standby is switched on,
green LED keeps lighting while selected channel receive a signal, press and hold
【
PTT
】
to reply;
red LED twinkles while designated channel receive a signal, press and hold
【
PF1
】
to reply.
PDF
文件使用
" pdf Fact or y Pr o"
试用版本创建
www. f i nepr i nt . cn