E
. Speaker
F.
Microphone
G
. Alphanumerical keypad
H
.
▲
/
▼
keys: to select the functions/menu
I.
EXIT: Push it to exit the menu and functions
J.
*SCAN: Reverse frequency/SCAN. Press to activate the Reverse frequency; keep it pressed to activate the SCAN
function
K
. 0 / SQL: quick selection of the squelch setting
L
. #
: Keypad lock. Long pressure: the keypad will be locked. Short pressure: high or low power selection.
L is displayed when you activate the low power.
M
. MENU: enter the MENU functions and confirms the selection.
N
. Led: transmission (red) ; reception (green).
O
. VFO/MR: to change the frequency or the channel mode
P.
A/B. This control is useful to select the desired frequency, VHF or UHF.
Q
. PTT
R.
MON. Long press: to activate the Monitor function. Short press: turns the flashlight on. Press it again to issue
an emergency light.
S.
CALL: press it activate the FM radio. If you keep it pressed for 5 seconds you will hear an alarm note and the
radio will switch to alarm mode.
T
. MIC/SP: External speaker/mike jacks.
U.
3800mAh Li-Ion battery pack
4.2 Main controls and parts of the radio
LCD Display
1.
These symbols show that you set a
DCS
or
CTCSS
code in tx or rx. In tx mode it appears while you are
transmitting, while in rx mode it is shown also in stand-by condition.
2.
Received signal strength.
3.
Low power selection
4.
This letter is displayed when the
Dual Watch
function is active.
5.
VOX
function enabled.
6.
Appears when a
positive shift
is activated.
7.
Appears when a
negative shift
is enabled.
8.
Reverse
frequency
9.
Narrow/Wide bandwidth:
N = narrow. W=Wide
10
. This icon indicates the
keypad lock
. To unlock it press
[#
]
.
11
.
Battery level indicator.
When the battery is almost used up, the icon starts blinking and the transmission is
