User
Manual
of
DM
‐
5R
Two
‐
way
Radio
7
This symbol appears when the channel operates in narrow band.
8
This symbol appears when the keyboard is in locking state. The keyboard can be unlocked by pressing #/LOCK key.
9
Display of current remaining battery power;
indicates that the battery is in full charge;
indicates the
remaining battery power;
indicates that the battery is running out, now the outline of the icon flashes, and no
transmitting shall be done.
10
This symbol indicates that current CTCSS is CTCSS. This signal appearing when transmitting represents that the CTCSS
signaling is being transmitted.
11
This symbol indicates that current CTCSS is DCS. This signal appearing when transmitting represents that the DCS
signaling is being transmitted.
12
Frequency A, channel display area; simple menu prompt and set parameter display in menu setting mode.
13
This symbol indicates that the DTMF signaling is activated.
14
Frequency A and Frequency B pointer
15
Frequency B, channel display area; simple menu prompt and set parameter display in menu setting mode.
16
Indication of stepped frequency mantissa (in KHz)
17
Indicate channel sequence number in Segment B channel mode.
18
Indicate channel sequence number in Segment A channel mode; indicate menu sequence number in menu mode.
19 D
Display of D represents that current channel is digital channel; non-display of D represents that current channel is analog
channel.
■
Basic operation
Startup and shutdown
Rotate the [power on/off/volume control] button clockwise until you hear "click" sound, the two-way radio beeps twice loudly, now
you can see that the full two-way radio screen lights up immediately and hear the voice prompt that current mode is channel (or
frequency) mode. Then frequency and other designators are displayed.
△
Rotate the same button until you hear "click" sound to turn off the two-way radio.
If the voice prompt function of the two-way radio is disabled, startup prompt tone will not be issued. Startup display mode
setting is in Menu 38; it can be set as full screen lighting up (FULL) or model display (MGS).
Volume adjustment
After turning on the power supply, rotate the [power on/off/volume control] button clockwise to increase the volume gradually.
△
Rotate the same button anticlockwise to reduce the volume gradually until the power supply is turned off.
Talkback (transmitting and receiving)
◎
Call transmitting: After selecting a proper channel (or entering your desired frequency), press [PTT] key, now the two-way radio is
in transmitting state. Then speak to the microphone with a normal tone. You can switch the transmitting power according to actual
need (power setting is in Menu 2):
·When transmitting by pressing [PTT] key, display of L at the top of the screen represents that the current transmitting power is low
power.
·When transmitting by pressing [PTT] key, non-display of L at the top of the screen represents that the current transmitting power is
