Baoding Longer Precision Pump EasyPump Series, Manual

Page: 8 / 28

Shenchen Pump EasyPump Series
- 5 -
Pump head screw
Rubber coupler
(2) Round shaft pump head installation with plum blossom coupler
Install the plum blossom coupler on the pump head shaft, adjust to suitable
position, fasten the coupler screw. Then install the pump head on the driver
motor shaft with coupler, fasten the pump head screws to fix the pump
head on the driver. Please try to use same force to fasten the screws.
Pump head screw
Plum blossom coupler
2.2 Multiple Pump Head Installation
Usually, the pump head is already installed on the pump drive when you
receive it.
If the multiple pump heads are separate from the pump drive, please refer to
the below installation instruction: