manualshive.com logo in svg

Banzai BATTLE BLAST ADVENTURE PARK 90341, Manual

Share
Download
Banzai BATTLE BLAST ADVENTURE PARK 90341 Manual Download Page 8

SEP. 2019   

8

Attn: Each time the blower is used, a simple test with the Ground Fault 

Circuit Interrupter (GFCI) must be conducted. 

1.  Push the “Reset” button located on the GFCI receptacle, first to assure normal blower and GFCI operation.
2.  Press “ I ” to switch on the blower.
3.  Push the “Test” button located on the GFCI receptacle. The blower should go “OFF.”
4.  Push the “Reset” button again. The blower should go “ON” again.
The indicator on the GFCI receptacle will be red whenever the “Reset” button is pressed.
If the blower remains “ON” when the “Test” button is pushed, the blower or GFCI is not working properly. If blower or GFCI is not working 

properly, please call a qualified, certified electrician who can assess the situation.

Maintenance and Storage:

1.  To keep the product clean you can use a dry cloth or a cloth dampened with a neutral, non-inflammable, nontoxic cleaning and sanitizing solution or 

pure water to wipe the surface of the blower.

2.   You should not clean the blower with a chemical solution as this may damage the coating and plastic parts.
3.   Never clean the blower in water.
4.  Never store the blower outside. Keep it in a dry place indoors unreachable by children.
5.  Regularly check the condition of the blower stakes. Damage to or deterioration of the stakes could result in the blower becoming unstable, which could result in serious injury.
6.  Regularly check the condition of the power cord. Damage to or deterioration of the cord could cause a serious electrocution hazard. If the cord is damaged or deteriorated, immediately 

discontinue use of the blower and contact the manufacturer.

7.   This blower is equipped with an Auto-Reset Protector. If the motor overheats, the protector will trip to protect your safety. Turn off the blower and let it cool down completely before using again. 

Please follow the instructions carefully to avoid any wrong operation that will cause overheating.

8.  To prevent any damage to the power cord, always carry the blower by its built-in handle. Do not carry the blower by its cord or twist the cord. Keep the power cord dry.

RESET

TEST

Indicator

ALL NEW MATERIAL. Surface Clean Only. Electrical ratings: 110-120VAC, 60Hz, 6A

NOTE: The maximum wind speed for

operations of the inflatable shall be 20 mph.

BEFORE RETURNING TO STORE

PLEASE VISIT THE CUSTOMER SERVICE WEBSITE 
BELOW FOR IMMEDIATE ASSISTANCE REGARDING 
QUESTIONS OR PROBLEMS WITH THIS PRODUCT. 

www.toysinquiry.com

TANG RONG ROAD,
CHANGPING, DONGGUAN, CHINA

MADE IN CHINA

www.toysinquiry.com

ALL RIGHTS RESERVED

BANZAI IS USED UNDER LICENSE
BY FOCUS BRAND LTD.
CONTENTS AND SPECIFICATIONS
MAY VARY FROM THOSE ILLUSTRATED.

90341

Summary of Contents for BATTLE BLAST ADVENTURE PARK 90341









Reviews:

No comments

Brands by name

Popular brands

Load more brands