Setup Instructions
6.
5.
7.
8.
5.
NOTE: Fill inflatable with
air until the inflatable is
firm and solid. If there is
any straining at the
seams, the item is over
inflated. If any seam
begins to strain,
immediately stop inflation
and release air to reduce
the pressure until all
signs of stress on the
inflatable are gone. DO
NOT use the item if there
is straining at the seams.
Use of an over inflated
item can result in serious
injury, paralysis or death.
6. When the Motorized
Wave Cruiser™ is
partially inflated, fully
insert the pipe cover from
the top. Finish inflating
the air chambers.
7. Insert the propeller unit
into the pipe cover from
underneath the Motorized
Wave Cruiser™. You will
hear the unit click into
place when it is properly
inserted.
8. Attach the controller unit
to the top of the propeller
pipe by aligning the
connectors and pressing
the unit down until it
clicks twice.
NOTE: If you do not hear
2 clicks, the controller
unit is not properly
attached to the propeller
pipe.
For easier assembly,
push at the positions
shown.
BANZAI 15733 20121130 6
