Bannon 57937, Owner'S Manual, Page: 10 / 21

Page 10 of 21
DOWNROD ASSEMBLY (included)

Remove clamp pin (1) and cross pin (2) from down rod (3).

Feed motor lead wires through downrod and canopy assembly and insert downrod into downrod
yoke.

Make sure to align holes in downrod with the hole in the yoke.

Install yoke cross pin (1) through yoke and downrod.

Insert clamp pin (2) into cross pin until it snaps securely into place.

Tighten set screws (3) in yoke.
USING EXTENDED DOWNROD
(Not included)

Loosen the downrod ball (1) from the downrod (2) by removing the screw (3).

Slide downrod ball (1) off of the downrod and remove pin (2).