Bannon 51206 Owner'S Manual Download Page 5

Page 5 of 13 

 

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. 
Cluttered, wet, or dark work areas can result in injury. Using the wagon in confined work areas 
may put you dangerously close to other cutting tools and rotating parts. 

 

Keep children and bystanders away from the work area while operating the wagon. Do not allow 
children to handle the wagon.  

 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your 
work area. Some of these hazards may be hidden from your view and may cause personal injury 
and/or property damage if contacted. 

 

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the wagon. Do not 
use the wagon while you are tired or under the influence of drugs, alcohol, or medication. A 
moment of inattention while operating the wagon may result in serious personal injury. 

 

Do not use the wagon when tired or under the influence of drugs, alcohol or medication. 

 

 

WAGON USE AND CARE 

 

Do not force the wagon. Products do a better and safer job when used in the manner for which 
they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the wagon will operate properly 
and perform its intended function. Replace damaged or worn parts immediately. Never operate 
the wagon with a damaged part. 

 

Store the wagon when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your wagon. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure 
than the tool itself. 

Summary of Contents for 51206














Reviews: