TCNM-AD/EX/SP Setup Procedure Using Programming Barcodes
2
p/n 174900 Rev. A
Stand-Alone Layout Barcode
To re-program a network scanner for a stand-alone configuration, use the following barcode.
Stand-Alone Layout
Step 1. Press and hold the SMART-TEACH button to enter the “AutoLearn Mode”. Once button is
pressed, the LED cycle appears as follows:
Just pressed.
After 2 seconds.
After 4 seconds. Release
the button to enter the
AutoLearn Mode.
The laser beam turns ON
and the yellow LEARN
LED blinks: the AutoLearn
Mode is working.
Step 2. Put the barcode related to the planned function in front of the scanner. The picture below
shows, as example, the Restore Default Values barcode
Step 3. After the scanner has successfully read the code, the LEDs stay on steady for 2 seconds.
1
The barcodes shown are examples, only. Use the barcodes in the Stand-Alone Layout Barcodes section for the
actual programming.
