RUN Menu
*
RUN
AUTO
DISPLAY
LOOP
adjust the rotary
switches to survey
the selected Node
(DEV)
I/O XX
GATEWY
NID XX
ON/OFF
(DEV)
I/O XX
GATEWY
NID XX
ON/OFF
Single-click
Button 1
Single-click
Button 1
*
RUN
AUTO
DISPLAY
LOOP
(DEV)
I/O XX
NOD XX
NID XX
ON/OFF
Single-click
Button 1
0.00
Gateway
Node
The RUN menu displays the network ID (NID), device name (Gate-
way or Node), and the I/O values of the device.
When using extended address mode, the network ID (NID) is not
used. The Network ID is typically used only in rotary dial address
mode.
On the Gateway, the I/O displayed may be the I/O of the Gateway
or of a selected Node. To view the I/O of a specific Node, set the
position of the rotary dials to the Node's address. For example, to
view the I/O of Node 12, set the Gateway's left rotary dial to 1 and
the right rotary dial to 2.
SureCross Wireless I/O Network Manual
rev. I
www.bannerengineering.com - tel: 763-544-3164
15
