Programmable Safety Controller SCR P
192
www.bernstein.eu
- Tel: + 49 571 793 0
15 Standards and Regulations
The list of standards below is included as a convenience for users of this BERNSTEIN device. Inclusion of the
standards below does not imply that the device complies specifically with any standard, other than those specified in
the Specifications section of this manual.
15.1 Applicable European and International Standards
EN ISO 12100 Safety of Machinery
– General Principles for Design — Risk Assessment and Risk
Reduction ISO 13857 Safety Distances . . . Upper and Lower Limbs
ISO 13850 (EN 418) Emergency Stop Devices, Functional Aspects
– Principles for
Design ISO 13851 Two-Hand Control Devices
– Principles for Design and Selection
IEC 62061 Functional Safety of Safety-Related Electrical, Electronic and Programmable Control
Systems EN ISO 13849-1 Safety-Related Parts of Control Systems
EN 13855 (EN 999) The Positioning of Protective Equipment in Respect to Approach Speeds of Parts of the Human
Body ISO 14119 (EN 1088) Interlocking Devices Associated with Guards
– Principles for Design and Selection
EN 60204-1 Electrical Equipment of Machines Part 1: General
Requirements IEC 61496 Electro-sensitive Protection Equipment
IEC 60529 Degrees of Protection Provided by Enclosures
IEC 60947-1 Low Voltage Switchgear
– General Rules
IEC 60947-5-1 Low Voltage Switchgear
– Electromechanical Control Circuit Devices
IEC 60947-5-5 Low Voltage Switchgear
– Electrical Emergency Stop Device with Mechanical Latching
Function IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related
Systems
IEC 62046 Safety of Machinery
– Applications of Protective Equipment to Detect the Presence of Persons
